30
4
3
0
• A beep will indicate access to the answer machine,
Any unread messages will be automatically played
back.
• At the end of playback, a new beep will sound to let
you know that the answer machine is ready.
• You can carry out the following operations :
- 0 : delete the message being played.
- 1 : go back to the beginning of the message.
- 1 (x2): previous message.
- 2 : pause / play.
- 3 : next message.
- 5 : messages read.
- 9 : enable/disable the answering machine.
DELETING ALL THE OLD MESSAGES
•Go to ANS. MACH / MESSAGES / DELETE OLD.
•Press Valid..
• To confirm the deletion of all the old messages, press
Yes.
•Press Return to go back to the previous menu.
TAM SETTINGS
This menu allows you to change the advanced settings of
your answering machine. You can access the answering
machine SETTINGS menu from the ANS. MACH menu.
ACTIVATING AND DEACTIVATING CALL
SCREENING
The filtering function, when activated, allows you to listen
to the message left by the caller as it is being recorded.
You can unhook to answer at any time.
•Go to ANS. MACH/SETTINGS/CALL SCREENING.
•Press Valid..
• A screen indicating the function status appears.
- To keep the current status, press Valid..
- To change the status, press or .
•Press Valid..
MODIFYING THE REMOTE ACCESS CODE
The remote access code enables you to listen to the
messages left on your answering machine via another
telephone.
•Go to ANS. MACH / SETTINGS / REMOTE CODE.
•Press Valid..
To delete old messages one by one, refer
to the previous paragraph and delete
unwanted messages during playback.
To Next Page
Loading...
Need help?
General
