SAGEMCOM SIXTY - Dialling Mode and Flash Duration; PABX Prefix and Country Settings

27
4
2
7
Setting a PABX prefix
If a private automatic branch exchange is used, you can
programme the external call prefix.
With this function you can set the:
- PABX prefix number,
- dialled number length at which point the PABX
prefix will be automatically inserted (this length is
called “digit before prefix”),
- prefix status (on or off).
•Go to SETTINGS / ADVANCED SET. / SET LINE /
PABX PREFIX.
•Press Valid..
•Press  or  to modify this setting.
• Select the desired option:
- ACTIVATE / DEACTIVATE : to select a status.
- PREFIX : to enter the number giving you access to
the outside line.
- EDIT LENGTH : to specify the «digits before
prefix».
• To modify the prefix, select PREFIX press Valid..
• Enter the prefix using the keypad, press Valid..
OK is displayed on the screen.
• To modify the digits before prefix, select EDIT
LENGTH, press Valid..
• Enter the digits before prefix using the keypad.
•Press Valid.. OK is displayed on the screen.
• Now you can activate the automatic PABX prefix
functionality, select ACTIVATE and press Yes.
•Press Return to go back to the previous menu.
Modifying the country
Tihs menu allows you to select the country where you are
using the telephone.
•Go to SETTINGS / ADVANCED SET. / SET LINE :
COUNTRY.
•Press Valid..
• An information screen presents the liste of countries
available.
- To keep the displayed country, press Valid..
- To change the country, press  or .
•Press Valid..
• RE-INIT. IN PROCESS, then OK is displayed on the
screen
Modifying the base code
This code secures and limits the use of your telephone.
•Go to SETTINGS / ADVANCED SET. /
CHANGE CODE.
•Press Valid..
• Enter the old base code using the keypad
(default is 0000).
•Press Valid..
• Enter the new base code using the keypad.
•Press Valid..
• Confirm by entering the new base code again.
•Press Valid.. OK is displayed on the screen.
•Press Return to go back to the previous menu.