Sailor COMPACT HF SSB T2130 User Manual

3 SERVICE T2130
3.7 NECESSARY ADJUSTMENTS AFTER REPAIR
3.7.1 MODULES REPLACED
3.7.1.1 POWER AMPLIFIER (MODULE 1)
Adjust the Power Amplifier (1) as described in section 3.6.1.
Perform a calibration of T2130. Please refer to chapter 3.9. SERVICE PROGRAMMES, SP-25.
3.7.1.2 OUTPUT FILTER (MODULE 2)
Adjust the Output Filter (2) as described in section 3.6.2.
3.7.1.3 TX-PROCESSOR (MODULE 3)
New module delivered direct from S. P. Radio A/S:
Calibrate the T2130. Please refer to section 3.9. SERVICE PROGRAMMES, SP-25.
An exchanged module:
1. Check the EEPROM’s by entering SP-24-0.
2. Initialize the EEPROM’s by entering SP-24-2.
3. Calibrate the T2130. Please refer to chapter 3.9. SERVICE PROGRAMMES,
SP-25.
3.7.1.4 POWER SUPPLY (MODULE 4)
No adjustments.
3.7.1.6 CONNECTION BOARD (MODULE 6)
No adjustments.
PAGE 3-23

Sailor COMPACT HF SSB T2130 Specifications

General

Brand	Sailor
Model	COMPACT HF SSB T2130
Category	Control Unit
Language	English