EasyManua.ls Logo

Sailor COMPACT HF SSB T2130 - General Information; Introduction; General Description

Sailor COMPACT HF SSB T2130
138 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 GENERAL INFORMATION T2130
1 GENERAL INFORMATION
1.1 INTRODUCTION
The SAILOR Compact HF SSB T2130 is a 250W PEP SSB transmitter for the SAILOR Compact HF SSB
Programme 2000.
SAILOR Compact HF SSB Programme 2000 is a powerful, advanced, high technology short wave
communication system, which is extremely easy to operate.
Is has been developed on the basis of S. P. Radio’s many years of experience with short wave
communication equipment.
Is has the same high reliability as all SAILOR equipment is known for.
SAILOR HF SSB PROGRAMME 2000 CONSISTS OF THE FOLLOWING UNITS:
RE2100: Control unit with integral receiver and exciter.
T2130: 250W PEP SSB transmitter with integral power supply for RE2100.
Supply voltage 24V.
AT2110: 250W PEP aerial coupler for use outdoors.
N2160: 12V DC power supply for T2130.
N2161: 110/220/240V AC, 50 Hz power supply for T2130.
1.2 GENERAL DESCRIPTION
SAILOR HF SSB T2130 is an all solid state constructed microcomputer controlled SSB shortwave
transmitter.
SAILOR HF SSB T2130 covers the frequency range from 1.6 MHz to 30 MHz.
SAILOR HF SSB T2130 has an output power of 250W PEP.
SAILOR HF SSB T2130 is constructed for continuous operation.
SAILOR HF SSB T2130 has 50 ohm output impedance.
SAILOR HF SSB T2130 is able to control the automatic aerial coupler AT2110.
SAILOR HF SSB T2130 has built-in power supply for 24V DC.
SAILOR HF SSB T2130 is able to supply the transceiver RE2100.
SAILOR HF SSB T2130 has built-in protection system, so that it will not be damaged if the aerial
is open circuited or short-circuited.
PAGE 1-1
9345

Table of Contents

Related product manuals