Saipa tiba - Windshield Wipers Blades

150
Windshield wiper blades
Replacing windshield wiper
blades
When the windshield wipers do not
clean the windshield properly, rst
clean windshield then clean and
wash wiper blades with water and
detergent and check wiper blades
function again. If they do not clean
the windshield properly, the wiper
blades may have crack or torn. In
this case, replace the wiper blades.
Pull the windshield wipers arms
from the windshield and turn it
so that its plastic clamp is visible.
Press the clamp and slide the
blade toward the windshield, then
pull it out from the wiper arm.
1- Pressing direction of the clamp
2-Removing direction of blade from
wiper
Notice
To prevent damage of the wiper
arms and other components, DO
NOT try or attempt to sweep the
wiper arm by hand.
Wiper arm maintenance
Attention
If the windshield is not cleaned
by wipers properly, clean the
windshield and wiper blades with
a suitable detergent and wash
them with water.
To prevent damage of the wiper
blades, do not allow gas oil,
kerosene, thinner, and other
solvents to contaminate them.
7
OWM131
2
1