78
Lamps
Control of lamps
To turn on the lamps, turn the
end part of the lever on the left
side of the steering column.
First position
In this position all the lamps are
off.
Second position
In this position, the following
lamps turn on:
- tail lamps
- license plate lamps
- side marker lamps
- instrument panel lights
Third position
By turning the control lever to
the third position, headlamps
together with the previously
mentioned lamps and lights turn
on.
To set the headlamps in high-
beam condition, push forward
the control lever.
To return to low-beam condition,
pull the lever back and then
release.
When the headlamps are in
high-beam condition, the high-
beam light on the instrument
panel turns on.
To prevent discharging of the
battery, do not leave the lamps
on after turning the engine off at
all.
OWM080
OWM081
4
To Next Page
