161
4- By pushing the bulbs slightly,
turn it a quarter counter-
clockwise and pull it out.
5- Place the new bulb inside
its holder and turn it a quarter
clockwise by slightly pushing it
to x the bulb in its place.
6- Place the bulb holder inside
the rear light assembly and turn
it a quarter clockwise to x the
holder in its place.
7- Install carefully the light
assembly in its place.
Room light bulb replacement
1- By levering a regular screw
driver remove the transparent
plastic cover of the room light
gently, as shown in the gure.
2- Push the spring holder of the
bulb to remove it.
3- Install a new bulb in its place
by sliding the bulb in its holder.
4- Insert the transparent plastic
cover of room light by properly
adjusting its projections into the
slots of the room light housing.
7
OWM141
Room light
To Next Page
