34
Fixing a child seat by the lap
belt
1- Replace the child seat in the
middle part of rear seat.
2- Pull the lap belt latch.
3- Insert the tab of belt through
the position specied by the
manufacturer of the child seat.
4- Lock the belt and ensure it
is xed rmly by pulling the belt
tab. After installation, move the
child seat in different directions
to ensure it is xed rmly.
3
OWM028
Safety Belt
Warning light of seat belt
The safety belt warning light
turns on if the ignition switch is
in ON position and the safety
belt is not locked.
OWM029
To Next Page
