37
3- To lengthen the belt tap, pull the
latch plate at the proper angle.
4- To shorten the belt tab, pull the
latch plate at the proper angle to
set the desired length.
5- Pull the extra part of the belt so
that the tab ts completely under
your abdomen.
Warning
Be careful to t completely both
sides of the rear middle seat belt
under your abdomen. Otherwise,
in an accident there is possibility
of injuries.
3
OWM036
OWM037
Safety Belt
Guides on the proper use of
safety belts
To check the proper function of
safety belts, the following points
should be noticed:
- Always use the safety belt even in
short trips.
- If there is any torsion in the belt
tab, smooth it before using.
- Prevent from touching sharp and
coarse objects with the belt tab,
because they will damage the tab.
- Regularly check the belt function
for retraction, anchors, locks, other
parts, and any possible damages.
In the case of any damage, replace
the damaged parts.
- To clean the belt tab, use water
and soap solution which can also
be used in cleaning the seat covers.
Do not apply detergent for cleaning
the belts. This will reduce the
retraction power.
- After unlocking the seat belt, pay
attention to the belt to be retracted
completely by the retractor.
To Next Page
