What to do if my Saitek Game Console freezes during a game?
If your Saitek Game Console is unresponsive, acting strangely, or freezing during gameplay, try these steps: * First, reinstall the batteries, making sure they are oriented correctly. * If that doesn't work, replace the batteries with new ones. * As a last resort, reset the console by pressing into the hole marked ACL.
Why is my Saitek Game Console making irrational moves?
If your Saitek Game Console is making moves that seem too fast or don't make sense, it could be due to the level setting or low batteries. First, check the level setting and change it if needed. If the problem continues, try replacing the batteries with fresh ones.
What to do if Saitek Game Console will not accept my move?
If your Saitek Game Console isn't accepting your moves, consider these possibilities: Is it currently your turn? Is your King in check? Would your move put your King in check? Are you attempting to castle incorrectly, or moving to an illegal square? Also, check if the computer is currently processing, indicated by its color symbol flashing. Review the rules and verify the position to ensure it's correct. If the computer is thinking, you can press ENTER to interrupt it.
Why is my Saitek Game Console making illegal moves?
If your Saitek Game Console appears to be making illegal moves, there are a few potential causes. The computer might be executing a special move like en passant, castling, or pawn promotion, so review the rules and verify the position. Also, ensure your board position is correct. Lastly, low batteries can cause this issue, so try replacing them with fresh ones.
How to fix a Saitek Game Console display that is difficult to read?
If the display on your Saitek Game Console is hard to read, the batteries may be weak. Try replacing them with new alkaline batteries.
What to do if my Saitek Game Console will not make a move?
If your Saitek Game Console isn't making any moves, the Auto Answer option may be disabled. The computer only responds automatically if Auto Answer is turned on. Alternatively, the computer might be thinking for a long time on a high level; you can press ENTER to interrupt it.
Why does my Saitek Game Console show an error when I press a square?
If you receive an error message when pressing a square on your Saitek Game Console, it means you may have incorrectly entered the computer’s last move. Check the display and press the correct square to complete the computer’s move.
What to do if Saitek Game Console won’t exit Position Mode?
If you cannot exit Position Mode on your Saitek Game Console and only hear beeps when pressing CLEAR, it's likely because you have set up an illegal position. This could be due to a King being in check or too many pawns on the board. Check the position and make necessary changes. Then, press CLEAR again to exit Position Mode.
Why is my Saitek Game Console display showing only an underscore?
If your Saitek Game Console display shows only an underscore (_), it indicates that you are in Position Mode and have pressed ENTER to clear the board. To completely clear the board, press ENTER once more. If you want to cancel the clearing process, press CLEAR.
General| Manufacturer | Saitek |
|---|---|
| Type | Chess Computer |
| Model | Mephisto Chess Explorer |
| Display | LCD |
| Playing Strength | Approximately 1800 ELO |
| Power | Battery or AC adapter |
| Power Supply | 9V DC adapter |
To Next Page
