How to troubleshoot GFCI Error on SAJ R5-5K-S2 Inverter?
If your SAJ Inverter displays a GFCI Error, check the insulation resistance of the positive and negative sides of the solar panel. Also, check if the inverter is in a wet environment and ensure the inverter is properly grounded. If these checks are normal, contact your distributor or SAJ technical support.
What does ISO Error mean on my SAJ R5-5K-S2?
If your SAJ Inverter displays an ISO Error, check the insulation resistance of the positive and negative sides of the solar panel. Also, check if the inverter is in a wet environment and ensure the inverter grounding is secure. If these checks are normal, contact your distributor or SAJ technical support.
How to fix Overcurrent error on SAJ Inverter?
If your SAJ Inverter is showing an Overcurrent error, check the connection between the inverter and the grid, and test the grid voltage for stability. If these checks are normal, contact your distributor or SAJ technical support.
How to troubleshoot AC Voltage Error on SAJ Inverter?
To address an AC Voltage Error in your SAJ Inverter: * Verify the grid voltage. * Confirm the connection between the inverter and the grid. * Examine the on-grid standard settings of the inverter.
Why does my SAJ R5-5K-S2 Inverter show a Frequency Error?
If your SAJ Inverter shows a Frequency Error, check the country and frequency settings for your local grid. If these settings are correct, further assistance may be needed, so contact your distributor or SAJ technical support.
What to do if my SAJ R5-5K-S2 Inverter shows an AC Voltage Error?
If your SAJ Inverter displays an AC Voltage Error, start by checking the grid voltage and the connection between the inverter and the grid. Also, verify the inverter's on-grid standard settings.
What to do if PV Overcurrent error appears on SAJ R5-5K-S2 Inverter?
If you are experiencing a PV Overcurrent error on your SAJ Inverter, contact your distributor or SAJ technical support for assistance.
What to do if DCI Device Error appears on SAJ R5-5K-S2?
If you are experiencing a DCI Device Error with your SAJ Inverter frequently, contact your distributor or SAJ technical support for assistance.
What to do if Relay Error occurs frequently on SAJ Inverter?
If you are experiencing a Relay Error with your SAJ Inverter frequently, contact your distributor or SAJ technical support for assistance.
How to troubleshoot PV Voltage Fault on SAJ Inverter?
To troubleshoot a PV Voltage Fault on your SAJ Inverter, check the settings of the solar panel. An SAJ designer can help you with this. If the problem persists, contact your distributor or SAJ technical support.
General| Model | R5-5K-S2 |
|---|---|
| Rated Power | 5000 W |
| Start Voltage | 120 V |
| Number of MPPTs | 2 |
| Max. Input Current per MPPT | 13 A |
| Max Input Current | 26 A |
| Rated AC Voltage | 230 V |
| AC Voltage Range | 180-280V |
| Rated Frequency | 50 Hz / 60 Hz |
| THDI | <3% |
| Power Factor | >0.99 |
| Euro Efficiency | 97.5% |
| DC Switch | Integrated |
| Protection Degree | IP65 |
| Cooling Method | Natural Convection |
| Max. DC Power | 6500 W |
| Operating Temperature Range | -25°C to 60°C |
| Communication | WiFi |
| Humidity | 0~100% |
Explains hazard symbols like DANGER, WARNING, CAUTION, NOTICE.
Provides safety guidelines regarding electrical shock, high voltage, and environmental conditions.
Provides technical specifications for R5-0.7K/1K/1.5K-S1 models.
Warns about dangers of fire, electricity shock, and installation near inflammable items.
Stresses that electrical connection must be done by professional technicians with protective equipment.
Explains the AC connection procedures for R5 series inverters.
To Next Page
