What to do for High Temperature Error on SAJ Inverter?
To address a High Temperature Error with your SAJ Inverter: * Check if the radiator is blocked. * Ensure the inverter is operating within an appropriate temperature range (not too high or too low). If these checks are normal, contact your distributor or SAJ technical support.
How to fix Null line-to-earth voltage fault on SAJ R5-5K-S2?
To troubleshoot a 'Null line-to-earth voltage fault' on your SAJ Inverter, check if the connection of the AC output grounding terminal is stable and reliable. If the condition is normal, contact your distributor or SAJ technical support.
What to do if Overcurrent error occurs on SAJ R5-5K-S2?
To solve an Overcurrent issue on your SAJ Inverter: * Check the connection between the inverter and the grid. * Test the grid voltage to ensure it is stable. If the problem persists, contact your distributor or SAJ technical support.
How to resolve Frequency Error on SAJ Inverter?
To address a Frequency Error on your SAJ Inverter, check the country and frequency settings for your local grid. If the problem persists, contact your distributor or SAJ technical support.
How to fix ISO Error on SAJ R5-5K-S2 Inverter?
To solve the ISO Error on your SAJ Inverter: * Check the insulation resistance on both the positive and negative sides of the solar panel. * Make sure the inverter is not in a wet environment. * Confirm the grounding of the inverter is secure. If the problem continues, contact your distributor or SAJ technical support.
What to do if GFCI Error appears on SAJ R5-5K-S2?
To resolve a GFCI Error on your SAJ Inverter: * Check the insulation resistance of both the positive and negative sides of the solar panel. * Ensure the inverter isn't in a wet environment. * Verify the inverter's grounding. If the problem persists, contact your distributor or SAJ technical support.
General| Model | R5-5K-S2 |
|---|---|
| Rated Power | 5000 W |
| Start Voltage | 120 V |
| Number of MPPTs | 2 |
| Max. Input Current per MPPT | 13 A |
| Max Input Current | 26 A |
| Rated AC Voltage | 230 V |
| AC Voltage Range | 180-280V |
| Rated Frequency | 50 Hz / 60 Hz |
| THDI | <3% |
| Power Factor | >0.99 |
| Euro Efficiency | 97.5% |
| DC Switch | Integrated |
| Protection Degree | IP65 |
| Cooling Method | Natural Convection |
| Max. DC Power | 6500 W |
| Operating Temperature Range | -25°C to 60°C |
| Communication | WiFi |
| Humidity | 0~100% |
Explains hazard symbols like DANGER, WARNING, CAUTION, NOTICE.
Provides safety guidelines regarding electrical shock, high voltage, and environmental conditions.
Provides technical specifications for R5-0.7K/1K/1.5K-S1 models.
Warns about dangers of fire, electricity shock, and installation near inflammable items.
Stresses that electrical connection must be done by professional technicians with protective equipment.
Explains the AC connection procedures for R5 series inverters.
To Next Page
