Note: in order to access Playback mode, there must be photos in the camera memory. If there are no photos
in the camera memory you will not be able to access the Playback mode. You will need to take photos first in
order to view them afterwards in Playback.
Slide Show
Immediately upon entering the Playback mode, the camera will begin showing the photos currently in
memory in a slide show format. Press either the Left or Right button to exit this showing.
Note: this function can only occur if there is more than one photo in the camera memory.
Delete One Photo
You can delete the photo you are currently viewing as follows:
1. Ensure that you are in Playback mode.
2. Press the Left or Right button to terminate the Slide show function.
3. Press the Shutter/Confirm button. You will hear a continuous beeping voice.
4. Press the Shutter/Confirm button again to delete currently viewed photo.
View Photos
1. Ensure that you are in Playback mode.
2. Press the Left or Right button to view photos individually.
Transferring Images to your PC
There are 2 methods to download the pictures taken with your camera
- -
15
To Next Page
Loading...
