To exit the PictBridge, disconnect your printer.
c. CANCEL to exit the menu without making changes. Press the OK/Enter button to confirm your selection.
Setup Mode
Image Settings
:
This setting allows you to return your camera to its default settings. Select “Auto” to restore these settings.
1. Press the Menu button .
2. Press the and navigation buttons until you have selected the Image Settings menu.
3. Using the and navigation buttons, select AUTO to restore the default settings or select CANCEL to
exit the menu without making changes.
4. Press the OK/Enter button to confirm your selection.
Exposure
:
This setting allows you to control the brightness of your images.
1. Press the Menu button .
To Next Page
Loading...
