Sako V780 - Page 57

51
PC Multi-Reference and Simple PLC Function
Function
Code
Parameter
Name
Setting Range Default Property
PC-42
Running time of simple PLC
reference 12
0.0s(h) ～ 6553.5s(h) 0.0s(h) ☆
PC-43
Acceleration/deceleration time
of simple PLC reference 12
0 ～ 3 0 ☆
PC-44
Running time of simple PLC
reference 13
0.0s(h) ～ 6553.5s(h) 0.0s(h) ☆
PC-45
Acceleration/deceleration time
of simple PLC reference 13
0 ～ 3 0 ☆
PC-46
Running time of simple PLC
reference 14
0.0s(h) ～ 6553.5s(h) 0.0s(h) ☆
PC-47
Acceleration/deceleration time
of simple PLC reference 14
0 ～ 3 0 ☆
PC-48
Running time of simple PLC
reference 15
0.0s(h) ～ 6553.5s(h) 0.0s(h) ☆
PC-49
Acceleration/deceleration time
of simple PLC reference 15
0 ～ 3 0 ☆
PC-50 Time unit of simple PLC running 0: second 1: hour 0 ☆
PC-51 Reference 0 source
0: Set by PC-00
1: AI1
2: Panel
potentiometer
3: External panel
potentiometer
4: HDI pulse setting
5: PID
6: Set by preset
frequency (P0- 08),
modi󽗉ed via UP/
DOWN
0 ☆
6.1 Brief introduction of function code