Press the (SOURCE) button repeatedly on
theunit or the SOURCE button on the remote
control to select the desired mode.The LED
indicator on the front of the main unit will show
which mode is currently in use.
Press the + / - buttons on the unit or VOL+ / VOL-
on the remote control to adjust the volume.
If you wish to turn the sound off, press the
button on the remote control. Press the button
again or press the + /- buttons on the unit or
VOL+ / VOL- on the remote control to unmute.
Note: While adjusting the volume, the status LED
indicator will ash once. When the volume has
hit maximum/ minimum value level, the status LED
indicator will ash quickly.
•
•
Select Modes
Basic Operation
Standby/On
•
•
•
Auto Wake
•
If a TV or an external device is connected (AUX /
OPTICAL / HDMI ARC), the unit will switch on
automatically when the TV or the external
device is switched on.
Adjust the Volume
While playing, press the / / buttons
on the remote control to select the preset
equalizers:
: (recommended for watching movie)
: (recommended for listening to music)
: (recommended for listening to news)
12
When you rst connect the main unit to the mains
socket, the main unit will be in STANDBY mode.
Press the button on the unit or on the
remote control to switch the unit ON.
Press the button again to switch the unit
back to STANDBY mode.
Disconnect the mains plug from the mains
socket if you want to switch the unit OFF
completely.
The unit automatically turns to STANDBY mode
after about 1 5 minutes if the TV or the external
unit is disconnected or switched off.
Automatic Power Off| Function
To switch the unit off completely, disconnect
the mains plug from the mains socket.
Please turn the unit off completely to save
energy when not in use.
Selectal Preset Sound Effect
EN
EN
To Next Page