17
1.6 Description of Instrument Parts
1.6.1 Instrument (Front Side)
[1] Power switch
A switch for the main power supply. The lamp is turned on while power is
supplied.
[2] Cooling plate
A cooling plate that cools/solidies the embedded parafn block.
1.6.2 Instrument (Rear Side)
[1] Power inlet
Connect the power cord here.
[2] Control cable connector
Used to connect to the Embedding Module.
[3] Intake and exhaust openings
Openings of air ventilation for compressor.
[1]
[2]
[1]
[3]
[2]