Salter EK2118 - Connection To The Mains; Wiring Code and Plug Fitting; Non-Rewireable Mains Plug

Connection To The Mains
Please check that the voltage indicated on the product corresponds with your
supply voltage.
Important
As the colours in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, please proceed as follows:
The wires in the mains lead are coloured in accordance with the following code:
Blue Neutral (N)
Brown Live (L)
Green/Yellow Earth (
)
FOR UK USE ONLY -Plugttingdetails
(where applicable).
The wire coloured BLUE is the NEUTRAL and
must be connected to the terminal marked
N or coloured BLACK.
The wire coloured BROWN is the LIVE wire and must be connected to the terminal
marked L or coloured RED.
The wire coloured GREEN/YELLOW must be connected to the terminal marked with
the letter E or marked
.
On no account must either the BROWN or the BLUE wire be connected to the
EARTH terminal (
).
Always ensure that the cord grip is fastened correctly.
Theplugmustbettedwithafuseofthesameratingalreadyttedand
conforming to BS 1362 and be ASTA approved.
Ifindoubt,consultaqualiedelectricianwhowillbepleasedtodothisforyou.
Non-Rewireable Mains Plug
Ifyourapplianceissuppliedwithanon-rewireableplugttedtothemainslead
and should the fuse need replacing, you must use one that is ASTA approved one
(conforming to BS 1362 of the same rating).
Ifindoubt,consultaqualiedelectricianwhowillbepleasedtodothisforyou.
If you need to remove the plug, DISCONNECT IT FROM THE MAINS, then cut it off the
mains lead and immediately dispose of it safely. Never attempt to reuse the plug or
insert it into a socket outlet as there is a danger of an electric shock.