Salto WRADAPT - User Manual

Desktop Reader Manual V2.1
26/02/2007
1/11
DOCUMENT REVISIONS
Version Date Modifications
1.2 5/03/2004
1.3 11/03/2004 Note on Wall Reader Adaptor about minimum wall
reader versions.
1.4 12/03/2004 Fixes mistake on Desktop Reader Connector.
1.5 25/03/2004 Minimum WR2000 firmware version to read ROM
code from iButtonROM.
1.6 11/08/2005 NEW: ROM code configuration.
BCD Data Format (ANSI/ISO): It is used in Track 2
and Track 3.
New Card Technologies (Mifare, Desfire…)
2.1 26/02/2007 New Firmware Version 02.01
New RS232 Plain Text Format.
New Wiegand formats.
Desktop Reader and Wall Reader Adaptor
USER MANUAL
Version: 2.1
Distribution: SALTO customers

Summary

2 Desktop Reader: ECxxDR

2.1 Desktop Reader Setup

Configures the Desktop Reader, including baud rate, parity, and dipswitch settings.

2.2 Desktop Reader Connector

Details the 9-pin D-type connector functions for RS232, OMRON, and WIEGAND interfaces.

3 Wall Reader Adaptor: WRADAP

3.1 Wall Reader Connection

Describes the 5-pin connector for connecting the Wall Reader to the Adaptor.

3.2 External Device Connection

Details the 4-pin connector for external devices via RS232, OMRON, WIEGAND.

7 Data

7.1 ROM code

Explains the 7-byte Salto ROM code format (ROM14, ROM56) and its representation.

8 Interfaces

8.1 RS232 interface

Details the RS232 voltage levels and lack of hardware handshake.

9 Formats

9.1 RS232 format with STX, ETX and Checksum

Salto WRADAPT Specifications

General

Brand	Salto
Model	WRADAPT
Category	Receiver
Language	English