EasyManuals Logo

Salus iT500 Installer Manual

Salus iT500
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
1. Product compliance & safety information
These instructions are applicable to the SALUS Controls model stated on the front cover of this manual
only, and must not be used with any other make or model.
This accessory must be fitted by a competent person, and installation must comply with the guidance
provided in the current IEE Wiring Regulations and current Building Regulations. Failure to comply with
the requirements of these publications could lead to prosecution.
When fitting batteries, do not mix old and new batteries together.
Do not use rechargeable batteries.
Please leave these instructions with the end user where they should be kept in a safe place for future
reference.
02 iT500 Installer Manual
Always isolate the AC Mains supply before installing or working
on any components that require 230 VAC 50Hz supply.

Other manuals for Salus iT500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Salus iT500 and is the answer not in the manual?

Salus iT500 Specifications

General IconGeneral
Frequency868 MHz
InterfaceZ-Wave
Control typeTouch
Product colorBlack, Silver
Smart thermostatYes
Units of measurement°C
Maximum outdoor range30 m
Temperature range (T-T)5 - 35 °C
Battery typeAA
Operating voltage2 V
Number of batteries supported2
Handheld remote controlNo
Weight and Dimensions IconWeight and Dimensions
Depth30 mm
Width128 mm
Height95 mm

Related product manuals