Press the UP or DOWN key to adjust the hour setting to the desired value,
and confirm your selection by pressing the SELECT key.
Pressing the SELECT key allows you to step through each of the items to be
reviewed or adjusted within the programmes.
Pressing the SET key at any time will confirm the setting and return to the
programme set selection. Each programme for all the other days of the week
is set in exactly the same way – just repeat the steps shown above, after
entering programming mode and selecting the day you want to programme.
Regardless of which programming mode the RT500 is set for (5/2 or 7 day),
not pressing any keys for 15 seconds will automatically save any
programming changes and exit to Normal mode. You can also review or
change programme settings when Frost Protection is enabled.
RT500BC INSTRUCTION MANUAL
19
Salus RT500BC Boiler Control 026_89 21/01/2012 18:18 Page 19
To Next Page
Loading...
Need help?
General
