Press the UP or DOWN key to adjust the hour setting to the desired value,
and confirm your selection by pressing the SELECT key.
Pressing the SELECT key allows you to step through each of the items to
be reviewed or adjusted within the programmes in the following
sequence:
Programme Function Sequence
1 6am 00 21ºC
2 8am 00 14ºC
3 4pm 00 21ºC
4 6pm 00 21ºC
5 10pm 00 14ºC
…before then allowing you to cycle back to Programme 1. Pressing the
SET key at any time will confirm the setting and return to the programme
set selection.
7 DAY MODE
The RT505TX also offers a 7 day programming mode, which allows you
to programme five different sets of time and set point temperatures for
each day of the week to give a total of 35 separate programme settings.
To review or change a programme, press the SET key when the
RT505TX is in Normal mode. This will change the unit status to
Programme Setting mode.
The LCD display will display programme number 1 and SET PROG, with
all other indicators cleared. The weekdays will be flashing to indicate
they are the selected item and are ready to be adjusted.
Press the UP or DOWN key to change the
display to indicate the single day you
want to programme:
Pressing the SET key at any time when in
programming mode will return the
RT505TX into Normal mode. Press the
SELECT key to confirm the Day selection.
Once this is set, the ‘Hour’ will flash to
indicate that it is the selected item and is
the next item to be adjusted:
RT505TX INSTRUCTION MANUAL
9
To Next Page
Loading...
Need help?
General
