ST620 INSTRUCTION MANUAL18
MANUAL SETTING OF TIME AND DATE
If the time and date setting need to be set
manually, this can be done by accessing the
TIME menu. The rst option within the menu
is a choice of 12 or 24 hour clock setting.
On entering the menu, use the Touch Ring to scroll
to the preferred option (12 or 24 hour clock), and
conrm the choice using the OK button. Use the
Arrow key to return to the previous screen display.
After setting the time display format, the next screen
display allows you to set the time.
Use the Touch Ring to scroll to set the hour and conrm the choice using the OK button. The minute
setting will then be selected – change this setting in the same way using the Touch Ring, and
conrm the setting using the OK button. After setting the time, the next screen display allows you
to set the date – this is set in exactly the same way as previously described for the time.
To Next Page
Loading...
Need help?
General
