Sam4s ER-180T Series - Printer Specification; Paper Specification; Character Specification

2. Product Specifications
2-2 SAM4S ER-180T SERIES
2-1 General Specification
B. Printer Specification
Item Description Remark
Model
• LTPZ225 (SII)
Print Method
• Thermal Direct Line Printing
Total Number of Dots
• 192 Dots
Printing Format
Dot Pitch
• Vertical : 0.25 mm
• Horizontal : 0.25 mm
Printing Speed
• 30mm/Sec (7.7Line/Sec)
Printing Direction
• Unidirectional friction feed
Feeding Method
• Friction Feed
Minimum Feed Pitch
• 0.125 mm
Paper Feeding
Feeding Speed
• 30 mm/Sec
Power Voltage
• 6.5V
Head/Motor
Power Supply Volt
Circuit Input Voltage
• 5V
Head Control/Sensor
Heat Element Density
• 4 Dots/mm (100 dpi)
Total Head Elements
• 192 Dots/Dot Line
Printer Head
Available Printing Width
• 48 mm
Line Feed Motor
• 4-Phase Bi-Polar Stepping Motor
Head Temperature
• Thermistor
Sensor
Paper-End Sensor
• Mechanical Switch Sensor
Reliability Life
• 10km / 5×10
7
pulse
Dimension (mm)
• 69.8 (W) ×33.0 (D) ×16.0 (H)
Weight
• Approx. 45 g
Table2-2 Thermal Printer Specification
C. Paper Specification
Item Description Remark
Paper Type
• Single-ply Thermal Paper Roll
Paper Size
• 1 station 57.5 ±0.5 mm (Width) × diameter Ø 80 mm or less
Specified Paper
• Original Paper No : HPK-110 (Hansol paper XT)
Table2-3 Paper Specifications
Note: The following paper can be used instead of the specified paper above.
TF50KS-E: Nippon paper industries Co.,Ltd.
PD 160R : New Oji paper Mfg, Co.,Ltd. , F380 : Kansaki specialty papers, Inc. (USA)
D. Character Specification
Item Description Remark
Character Structure
• 8(W) × 12(H) Font (Including a horizontal)
Character Size
• 1.5 mm(W) ×3.0 mm(H)
Column Pitch
• 2.0 mm
Line Pitch
• 3.875 mm (Including 3.5-dot line spacing)
Number of Column
• 16 (8×12 Dots/Character)
Table2-4 Character Specification