Sam4s NR-510B - Recd on Acct 1-3; Service

SAM4S NR-500 Series Manual Program Mode Programming • 143
RECD ON ACCT 1-3
RECD ON ACCT 1-3 Key Program Notes
Option Entry Description
DESC Alpha
numeric
24
character
You can program a unique descriptor. The default
descriptors are RA 1-3.
HALO 7 digit
amount
You can limit errors by setting the maximum amount that
can be used with this function. "0" means that there is no
entry limit.
KEY DISABLE Y or N
Select Y to disable this function.
UNDER MGR
CONTROL
Y or N
Select Y if you do not want the operator use this function in
REGISTER MODE. When selected, the function is
allowed only in the MANAGER MODE.
COMPULSORY
VALIDATION
Y or N
Choose Y to enforce validation if an optional printer with
validation capability is connected to an RS-232C port.
SERVICE
SERVICE Key Program Notes
Option Entry Description
DESC Alpha
numeric
24
character
You can program a unique descriptor. The default
descriptor is SERVICE.
NON-ADD #
COMP
Y or N
Select Y if you wish to force the entry of a non-add number
(i.e. a tax exempt #) before the key is used
PRINT ON
RECEIPT
Y or N
Select N to not print on the receipt.
NEGATIVE
BALANCE IN
MGR CONTROL
Y or N
Select Y if you do not want the operator to use this function
in REGISTER MODE. When selected, the function is
allowed only in the MANAGER MODE.
CALCULATE TAX1-
4
Y or N
Select Y to calculate and add the appropriate tax
automatically when finalized with this key.
COMPULSORY
VALIDATION
Y or N
Choose Y to enforce validation if an optional printer with
validation capability is connected to an RS-232C port.
HARD CHECK
PRINTER PORT
(0-2)
0-2 If you are using a hard check system, enter the RS232C port
number (1 or 2) where the optional guest check printer is
attached.