3 Installation and Operation
3-30 SAM4S SAP-630 Series
3-7 Installation
3-7-1 Paper Roll Installation
1. Open the cover printer.
2. Pulling the Orange Lever will open paper cover in Figure3-2-①.
3. Ensure that the paper is being fed from the bottom of the roll. Place the roll into the concave bottom of the
printer. And put the leading edge of the paper over the printer in Figure3-2-②.
4. Close the printer cover slowly until it locks firmly.
5. Tear off the excess paper.
Figure 3-2 Paper Installation
To Next Page
Loading...
