X-Mode Procedures SER-7000 Operation Manual
Manager Operation
Some functions may be programmed to operate only when the register is in Manager
Operation mode.
Manager Control of Functions Inside of a Sales Transaction
If manager control is required to access a function inside of a sale, the message
"MANAGER REQUIRED" will display when the function is attempted. Turn the
control lock to the X position to perform the restricted function, and then return the
control lock to the REG position. The indicator MGR will display in the lower left
portion of the display when the register is in manager operation mode.
Manager Control of Functions Outside of a Sales Transaction
If manager control is required to access a function outside of a sale, the message
"MANAGER REQUIRED" will display when the function is attempted. Turn the
control lock to the X position, select MANAGER OPERATION (by pressing 1, then
ENTER) to perform the restricted function, and then return the control lock to the
REG position. The indicator MGR will display in the lower left portion of the
display when the register is in manager operation mode.
To Next Page
Loading...
