Sam4s SPS-300 Series - Paper Specification; Printable Area; Character Specification

2 Product Specifications
SAM4S ER-900/SPS-300 SERIES 2-5
2-3 Thermal Printer Specifications
2-3-2 Paper Specification
Item Description Remark
Paper Type
• Single-ply Thermal Paper Roll
Paper Size
• 58.0 +0/-1mm (Width) ×80 mm or less
Specified Paper
• Original Paper No : HPK-110 (Hansol paper XT)
Table2-4 Paper Specification
Note: The following paper can be used instead of the specified paper above.
TF50KS-E2D: Nippon paper industries Co.,Ltd.
PD 160R-63 : New Oji paper Mfg, Co.,Ltd.
KT55F20 : Papier fabric August KoehlerAG
2-3-3 Printable Area
The Printable area of a paper with width of 58.0(+0/-1mm) is 48mm(384 dots) and the space on the right and
left sides are approximately 4.75mm.
Figure2-3 Printable Area
2-3-4 Character Specification
Item Description Remark
Character Structure
• 12(W) × 24(H) Font (Including a Horizontal)
Character Size
• 1.25 mm(W) ×3.0 mm(H)
Column Pitch
• 1.5 mm
Line Pitch
• 3.75 mm (Including 6-dot Line Spacing)
Number of Column
• 32 (12×24 Dots/Character)
Table2-5 Character Specification
b
c d e
a
a = 58.0 +0/-1 mm (Paper Width)
b = 0.125
mm ( 1 Dot )
c = 48
mm (384 Dots/Printable Area)
d = 5.0
mm (Left Space)
e = 5.0
mm (Right Space)
All manuals and user guides at all-guides.com
all-guides.com