Samoa Larius 2 Transfer - SAFETY INSTRUCTIONS FOR INSTALLATIONS IN HAZARDOUS AREAS; ATEX - DECLARATION OF CONFORMITY

Before proceeding with the installation carefully
read the use and service manual. All the service
operations must be carried out as stated in the
manual.
The low pressure double diaphragm transfer
pumps series 2 and 4 must not work empty of
material.
All the operations, installation and service, must
be carried out by qualified operators.
EXAMPLE OF INSTALLATION
SAFETY INSTRUCTIOINS FOR ONSTALLATIONS IN HAZARDOUS AREAS
ATEX - DECLARATION OF CONFORMITY
Fig. 1M
www.larius.com
13
LARIUS 2 - TRAnSfeR
ED. 07 - 09/2020 - Cod. 150146

double diaphragm pump.
       


 

 
       


 
the material to prevent solid parts entering the pump.
        


        

 
by a safe area.
We Larius S.r.l.
Via Stoppani, 21
 

Low pressure transfer double diaphragm pumps - series 2
and 4.
        

- Directive 94/9/EC (ATEX)


- EN 1127-1
- EN 13463-5
- EN 13463-1
3
X

II 2 G c IIB T4 Tamb.: - 10°C ÷ 50°C
Tmax. fluido: 60°C
 LARIUS 2-4/ATEX /05
 INERIS (0080)

