dB500a Specifications
Inputs
Microphone Balanced XLR
Line Balanced Combo XLR/Line
Outputs
Extension Balanced XLR
Controls
Mic Level Rotary
Line Level Rotary
Low EQ Rotary Center Detent, +/-12dB @100Hz
High-EQ Rotary Center Detent, +/-12dB @ 10kHz
Low Filter Switch Push Switch, High Pass (low-cut) 12dB per octave @80Hz
Output Switch Push Switch, Selects Mix orThru for Line Output Connector
Limiter Switch Push Switch, Optimax Multi-band dynamics - In/Out
Power Rating:
Low Frequency 400 Watt RMS
High Frequency 100 Watt RMS
Frequency Response: 60 Hz – 24 kHz ± 3 dB
Crossover Frequency: 2.3 kHz, 3 pole (24 dB Per Octave)
LF Driver: 15" heavy-duty bass transducer,
2.5" voice coil (Kapton Former)
50 oz. barium ferrite magnet
HF Driver: 1.75" titanium compression driver,
edge-wound copper voice coil,
75 oz. magnet structure
Mounting:
Stand Integral 1 3/8" Pole Mount Receptacle,
Fly Points 10
Stacking Large, gender mating stack-
ing bumpers
Weight: 61lbs.
(27.7kg.)
Dimensions: 30″ (h) x 19″ (w) x18″ (d)
762mm (h) x 483mm (w) x 457mm (d)
15
To Next Page
Loading...
Need help?
General