8
1. Trigger Pads - The four backlit velocity-sensitive trigger pads with aftertouch can send MIDI
note, velocity, and aftertouch messages or when the CC button is pressed send control
change information. The setting of the Trigger Pads note and control change information
can be set using the computer editor, as either toggle or momentary style buttons.
2. Transport Buttons - The five transport buttons control universal Rewind, Fast Forward, Stop,
Play and Record functions (respectively) in the factory default setting. They can also be
assigned to control different parameters. If you encounter a stuck (hanging) note, press
the Rewind and Fast Forward buttons together to send a Panic command to all ports and
channels.
3. Assignable Knobs - The eight knobs send continuous control change data. You can set up to
32 different parameters using the four presets.
4. PROG Button - Press this button to send program change information via the Function keys
(0–9). Press the key labeled ENTER to send the desired program change message. When
the PROG button is pressed, the button lights red and the keys will not send note informa-
tion.
5. PRESET Button - Press this button to choose one of the four available presets. Presets are
recalled by pressing one of the Trigger Pads. Each preset can have unique parameters
assigned to the Trigger Pads, Transport buttons, Assignable Knobs, and Modulation ribbon
strip.
6. CC Button - When pressed, the button lights red and the Trigger Pads change from sending
note information to control change information.
Front Panel Controls and Functions
To Next Page
Loading...
Need help?
General
