60
Specifications
System Specifications
Frequency Response <10Hz to 20kHz +0 / -0.1 dB effect out, -0.4 @ 100kHz,
<10Hz to 20kHz +0 / -0.1 dB effect in, -3dB @ >100kHz
Dynamic range 116 dB, un-weighted, 22 Hz to 22 kHz
THD 0.008 % typ. @ +4 dBu, 1 kHz Effect out, 0.016% effect in
Crosstalk >100dB, 22 Hz to 22 kHz
Operating Level Selectable +4dBu / -10 dBV
Max. Input Level +21dBu, balanced
CMRR Min. 40dB, >50dB @ 1kHz
Max. Output Level +21dBu, balanced
Balanced Input
Connectors XLR and 1/4" TRS jack
Impedance >20K Ohms balanced or unbalanced
Balanced Output
Connectors XLR and 1/4" TRS jack
Impedance 60 Ohms balanced or unbalanced
Key Input
Connector 1/4" jack
Impedance 10 k Ohm
Max. Input Level +21 dBu
Key Output
Connector 1/4" jack
Impedance 47 Ohms
Max. Output Level +21 dBu
Expander/Gate
Trigger range Variable (Off to +10 dB)
Attack <1 ms per 50 dB
Release Variable (Slow:100 ms / 1dB, Fast:100 ms / 100 dB)
Ratio Expander 1:2, Gate 1:16
Compressor Section
Detector RMS
Threshold -40 dB to +20 dB
Ratio Variable (1:1 to infinity : 1)
Manual Attack Time Variable (0.3 ms / 20 dB to 300 ms / 20dB)
Manual Release Time Variable (0.05 to 5 Sec)
Output gain Variable (-20 to +20 dB)
Peak Limiter Section
Threshold Variable 0 to Off
Ratio Preset
Limiter Ceiling type
Attack <5 ms
Release Typ. 20dB/s
De-Esser
Trigger range variable (off to 12dB)
Maximum 12dB Gain Reduction mid / high band
To Next Page
Loading...
