Samson STAGE 266 HT6 User Manual

Guided Tour - SR266
)2 dna 1( sannetnA :1 - The antenna mountings allow full rotation for optimum
placement. In normal operation, both Antenna 1 (the antenna on the left) and Antenna 2
(the antenna on the right) should be placed in a vertical position. Both antennas can be
folded inward for convenience when transporting.
2: Volume control - This knob sets the level of the audio signal being output through both
o
clockwisse.
utput jacks on the rear panel. Reference level is obtained when the knob is turned fully
3: ANT LEDs - When signal is being received, one of these will be lit , showing
you whether the (left) “1” or (right) “2” antenna is currently being used.
4: Power switch - Use this to turn the SR55 power on and off.
1
1
2
23
3
4
6
6
5
8

Samson STAGE 266 HT6 Specifications

General

Brand	Samson
Model	STAGE 266 HT6
Category	Microphone system
Language	English