Need help?Do you have a question about the Samson TROVIS 3730-3 and is the answer not in the manual?
General| Type | Electropneumatic positioner |
|---|---|
| Input Signal | 4 to 20 mA |
| Signal Range | 4 to 20 mA |
| Ambient Temperature | -40 to +80 °C (-40 to +176 °F) |
| Enclosure Rating | IP66/NEMA 4X |
| Explosion Protection | ATEX, IECEx |
| Connection Sizes | 1/4" NPT |
| Materials | Aluminum, Stainless Steel |
| Certifications | ATEX, IECEx, FM, CSA |
| Mounting | Linear or rotary actuators |
Details potential fatal injury risks due to explosive atmospheres and necessary precautions.
Covers requirements for servicing explosion-protected devices and maintenance procedures.
Details various attachment types for the positioner using accessories.
Provides detailed technical specifications for the positioner, including travel and signal data.
Provides detailed steps for direct attachment to Type 3277-5 and Type 3277 actuators.
Explains the attachment process to a Type 3510 Micro-flow Valve using a bracket.
Details how to adjust the lever and pin position based on actuator size and valve travel.
Details attachment to NAMUR rib or rod-type yokes using specific mounting parts.
Describes quick replacement of the positioner by blocking air in the actuator.
Provides travel tables for direct attachment and IEC 60534-6 (NAMUR) mounting.
Explains how to attach the positioner to various actuator types.
Explains how to start the positioner initialization process after all settings are made.
Describes initialization modes: MAX, NOM, MAN, and SUB for adapting to valve conditions.
Covers servicing requirements for explosion-protected devices, including inspection certificates.
To Next Page
