EasyManua.ls Logo

Samson 3730-4 User Manual

Samson 3730-4
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Series 3730
Type 3730-4 Electropneumatic Positioner
with PROFIBUS-PA communication
Mounting and
Operating Instructions
EB 8384-4 EN (1300-1613)
Firmware version K 1.17/R 1.46
Edition July 2017
Fig. 1 · Type 3730-4
New design
Old design

Table of Contents

Other manuals for Samson 3730-4

Question and Answer IconNeed help?

Do you have a question about the Samson 3730-4 and is the answer not in the manual?

Samson 3730-4 Specifications

General IconGeneral
Housing materialAluminum
Travel rangeUp to 150 mm (6 in)
Rotation angleUp to 90°
Protection classIP66
Connection sizesG¼ or ¼ NPT
Supply air pressure1.4-7 bar (20-100 psi)
Supply pressure range1.4-7 bar (20-100 psi)

Summary

Design and Principle of Operation

Communication

Explains PROFIBUS-PA communication, data transmission rates, and configuration software.

Technical Data

Lists rated travel, bus connection, software requirements, operating voltage, current, and air quality.

Attachment to the Control Valve – Mounting Parts and Accessories

Direct Attachment

Details mounting positioners directly to SAMSON Type 3277 actuators.

Attachment According to IEC 60534-6

Covers mounting positioners using NAMUR brackets and rod-type yokes.

Attachment According to VDI/VDE 3847

Explains attachment to Type 3277 actuators and NAMUR ribs.

Attachment to Type 3510 Micro-flow Valve

Describes mounting the positioner to the valve yoke using a bracket.

Attachment to Rotary Actuators

Details mounting positioners to rotary actuators using double brackets.

Connections

Pneumatic Connections

Details supply air, signal pressure, and air tube connections.

Electrical Connections

Covers electrical connection standards, cable entry, and power supply.

Operation

Operator Controls and Readings

Explains operation using the rotary pushbutton, slide switch, and display readings.

Enabling and Selecting Parameters

Guides on enabling parameters using codes and selecting them for configuration.

Operating Modes

Details automatic, manual, and fail-safe operating modes.

Start-up and Settings

Status and Diagnostic Alarms

Quick Start-up Guide

Servicing Explosion-Protected Devices

PROFIBUS-PA Communication

Related product manuals