Need help?Do you have a question about the Samson 3731-3 and is the answer not in the manual?
General| Brand | Samson |
|---|---|
| Model | 3731-3 |
| Category | Valve Positioners |
| Language | English |
Safety guidelines for personnel and equipment during use.
Procedure to verify the valve's travel range and positioner response.
Setting the 0% travel position based on actuator type and direction.
Critical warning regarding valve movement during initialization.
Explanation of different initialization modes (MAX, NOM, MAN, SUB).
Step-by-step guide for MAX initialization mode.
Step-by-step guide for NOM initialization mode.
Step-by-step guide for MAN initialization mode.
Instructions for emergency replacement calibration.
Steps to recalibrate the zero point for accuracy.
Procedure to restore factory default settings.
How to enable parameters and navigate settings.
Switching between automatic, manual, and fail-safe modes.
Explains alarm types and status classifications.
Procedure for acknowledging and confirming error messages.
Specific requirements for servicing Ex-protected equipment.
Lists errors related to initialization, range, and attachment.
Covers errors like control loop, zero point, autocorrelation, and fatal errors.
Lists errors related to signal, low reference variable, and i/p converter.
Covers errors in control, potentiometer, calibration, general, start-up, internal device, and HART parameters.
To Next Page
