Outdoor temperature limit value
for deactivation in reduced operation
(10 to 50 °C)
Outdoor temperature limit value
for return to rated operation
(30 to 50 °C)
Room set point
(0 to 40 °C)
Reduced room set point
(0 to 40 °C)
See chapters 4.1 and 4.2 on optimize and adaptation
modes
Sustained temperature
(0 to 40 °C)
Gradient of the return flow characteristic
for limitation of return flow temperature
(0.2 to 3.2) You must first enter the code number before
you can change this value.
The correlation between outdoor temperature and return
flow temperature is determined corresponding to the
flow temperature by the gradient value. See chapter 4.8
on limitation of the return flow temperature.
101112 13 14151617 18191 2 3 4 5 6 7 8 9 2021 22 23240
°C
101112 13 14151617 18191 2 3 4 5 6 7 8 9 2021 22 23240
°C
101112 13 14151617 18191 2 3 4 5 6 7 8 9 2021 22 23240
101112 13 14151617 18191 2 3 4 5 6 7 8 9 2021 22 23240
°C
1
101112 13 14151617 1819123456789 20212223240
°C
STOP
1011121314151617 18 19123456789 20212223240
°C
START
1
50