Charging temperature set point
(20 to 90 °C)
In systems 2, 3 and 5
End charging process
(20 to 90 °C)
In systems 2, 3 and 5
Return flow limitation temperature during drinking
water heating
(20 to 90 °C) You must first enter the code number before
you can change this value.
In systems 2, 3, 4.0 and 5
See chapter 4.8 on limitation of the return flow tempera-
ture
Solar circuit pump ON
(0 to 30 °C)
In systems 2.1, 4.1 and 4.2
Solar circuit pump OFF
(0 to 30 °C)
In systems 2.1, 4.1 and 4.2
Solar charging OFF
(20 to 90 °C)
In systems 2.1, 4.1 and 4.2
1011 12 13 14 15 1617 18 19123456789 20212223240
STOP
°C
101112 13 14151617 1819123456789 20212223240
°C
101112 13 14151617 18191 2 3 4 5 6 7 8 9 20 2122 23240
°C
101112 13 14151617 1819123456789 20212223240
°C
START
101112 13 14151617 1819123456789 20212223240
°C
STOP
101112 13 14151617 1819123456789 20212223240
°C
STOP
55