Samson ZM125 - ZM Series System Set Up Diagram

11
ZM Series System Set Up
1
2
3
4
5
6
7
8
9
*
0
#
The following is a typical constant voltage system setup for a small restaurant using the ZM125 mixer/amplifier feeding several audio
zones with paging and music. The first two ZM Series constant voltage outputs are connected to two ceiling speakers in each of the
Dining Rooms with their transformers set to a 12 watt tap. The third constant voltage output powers two speakers in the outside Bar
area with their transformers set to 25 watt. (The db300i's are specially treated so they're suitable for indoor and outdoor use.) The fourth
ZM Series amp channel powers small speakers in the lobby with a 12 watt tap.