EasyManua.ls Logo

Samson ZM125 - Specifications

Samson ZM125
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
Specifications
Specifications are subject to change without notice.
ZM75 ZM125
Input Sensitivity for
full output at maxi -
mum gain
Balanced Microphone Channels -50dBV ± 3dB
Balanced Line Channels -22dBV ± 3dB
Balanced Remote Microphone Station -50dBV ± 3dB
Balanced Telephone Paging -21dBV ± 3dB
Unbalanced Link-In -17dBV ± 3dB
Unbalanced Amp-In 0dB ± 3dB
Frequency Response at 1 watt from speaker out tap.100Hz~10kHz +1.5dB / -3dB
125Hz,250Hz,500Hz,1kHz,2kHz,4kHz,8kHz ±12dB ±3dB
Signal to Noise Ratio at rated power output Better than 90dB
Crosstalk at all control maximum -70dB at 1kHz
Rated Output Power at THD 0.36% 60Watts 120Watts
Total Harmonic Distortion(THD) at 1kHz rated
power
Less than 0.5%
Phantom Power 15VDC
Power Bandwidth from speaker out
tap
80Hz~15kHz with less than 0.5% THD
DC Output Offset Less than ±3mV
Operating Temperature/Humidity at non-con -
densing
34°~104°F (0°~40°C) at 95% humidity
Output Voltage and
Impedance
4 15.5V 22V
25V 10 5.2
70V 82 41
100V 165 83
Construction
Cooling Convection Cooled
Dimensions (Width/Height/Depth) 16.5(W) x 3.5(H) x 13.5(D) inches
420(W) x 88(H) x 343(D) mm
Net Weight 19.21 lb. (8.72 kg) 21.5 lb. (9.76 kg)
Graphic Equalizer
Amplifier

Other manuals for Samson ZM125

Related product manuals