74_ web viewer
web viewer
SPLIT-SCREEN
You can change the split mode by clicking each number icon.
• Click <
> button.
The screen displays the selected camera connected to the DVR in
“SINGLE MODE”.
• Click <
> button.
The screen displays the selected camera connected to the DVR in
“QUAD MODE”.
CONNECTED DVR
The IP of the connected DVR will be displayed.
M
Connection failure message
No Response : Appears when the DVR does not respond.
Access Denied : Appears when the maximum number of users is exceeded.
The number of simultaneous connection is limited to 2.
SINGLE MODE QUAD MODE
To Next Page
Loading...
