Need help?Do you have a question about the Samsung SPD-400 and is the answer not in the manual?
General| Connectivity technology | Wired |
|---|---|
| LED indicators | Yes |
| Power source type | DC |
| Power consumption (typical) | 10 W |
| Product color | Stainless steel |
Weight and Dimensions| Depth | 128 mm |
|---|---|
| Width | 178 mm |
| Height | 34 mm |
| Weight | 530 g |
States copyright ownership and rights reserved.
Identifies registered trademarks of Samsung Techwin and other companies.
Outlines limitations on reproducing or distributing the document.
States that Samsung Techwin is not liable for document accuracy or user reliance.
Details the warranty period and exclusions for product operation.
Essential safety guidelines for product operation and installation.
Alerts for risks like electric shock and proper handling procedures.
Definitions for warning symbols used in the manual and on the device.
Details on Class I construction, battery safety, and servicing guidelines.
Special notice regarding Perchlorate Material for California, USA users.
Further recommended safety measures for product placement and usage.
Highlights key functionalities like multi-format decoding and HD display.
Minimum system requirements for the PC used with the decoder.
Lists the contents of the product package and accessories.
Identifies front panel ports and their functions.
Identifies rear panel ports and their functions.
Detailed explanation of rear panel items like MONITOR, POWER, and ports.
Diagram and instructions for connecting external devices like cameras and monitors.
Guide on connecting monitors to the video output ports of the decoder.
Instructions for connecting microphones, speakers, and HDMI audio.
Steps for connecting Ethernet cable and power supply with precautions.
How to connect alarm input and output signals to the device's ports.
Electrical diagram illustrating alarm input and output connections.
Steps to access the decoder from a PC on the same local network.
How to connect the decoder directly to a modem for internet access.
Setting up the decoder in a small network environment with a router.
Instructions for setting up IP addresses on a PC connected to a broadband router.
Explanation of the buttons and functions within the IP Installer utility.
Manual configuration of network settings like IP address and subnet mask.
Further details on manual network configuration panes and password entry.
Specific IP and port settings when using a broadband router.
Automatic network configuration using the IP Installer utility.
How to check and configure dynamic IP settings for the decoder.
Steps to access the network device from a PC on a shared network.
Connecting to the decoder using its IP address in a web browser.
Steps to log into the decoder's interface with admin credentials.
Configuring video layouts, sequences, resolutions, and audio.
Adding, editing, and deleting single and 4-split video layouts.
Process for adding individual camera feeds to the system.
Table showing supported resolutions for single video streams by codec.
Steps to modify or remove existing video layout configurations.
Steps for creating 4-split screen layouts by combining single layouts.
Supported resolutions for 4-split video streams by codec.
Steps to modify or remove existing quad video layout configurations.
Configuring automatic cycling through different display layouts.
Adjusting monitor type and resolution for video output.
Customizing on-screen display elements like camera names and timestamps.
Adjusting audio input/output levels and settings.
Configuring network connection modes, IP types, DNS, and ports.
Configuring network connection modes, IP types, DNS, and ports.
Implementing secure connections with SSL and installing certificates.
Setting up alarm input types, activation times, and output actions.
Setting up event detection like motion or intelligent video analysis.
Managing product information, date, time, and user accounts.
Managing device name, location, description, and language settings.
Configuring system time, timezone, and daylight saving.
Options for manual, NTP, or PC synchronization of system time.
Managing user accounts, changing passwords, and setting permissions.
Procedures for upgrading firmware, factory resets, and system reboots.
Saving current settings and restoring them from a backup file.
Checking system and event logs for monitoring and troubleshooting.
Detailed specifications for video, audio, network, and electrical aspects.
Network protocols, security, web viewer, operating temperature, and power specs.
Diagrams showing the physical layout and measurements of the device.
Information regarding FCC regulations and environmental compliance (RoHS).
Guidance for environmentally responsible disposal of the product and batteries.
To Next Page
