Samsung SHR-5082 User Manual

Real Time DVR
user manual
Thank you for purchasing a Samsung product.
To receive a more complete service, please
register your product at
www.samsung.com/global/register
imagine the possibilities
SHR-5082
SHR-5162
Code No. AB68-00644A-00
Real Time DVR user manual
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at
the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for
details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product
should not be mixed with other commercial wastes for disposal.
SHR-5162_Eng.indb 44 2007-06-18 ｿﾀﾀ・11:46:52

Samsung SHR-5082 Specifications

General

Operating System	Embedded Linux
Video Compression	H.264
Alarm Input	4CH
Audio Compression	G.711
Remote Viewing	Yes
Motion Detection	Yes
Resolution	720x576 (PAL), 720x480 (NTSC)
Audio Input	4CH
Audio Output	1CH
Storage	Up to 2TB SATA HDD
Ethernet	10/100 Base-T
Protocols	TCP/IP, DHCP, DNS, DDNS, PPPoE, SMTP, NTP
Web Viewer	Yes
Smart Phone	Yes (iOS, Android)
USB	USB 2.0
RS-485	1x RS-485
Power Supply	12V DC
Network Interface	RJ-45
USB Interface	1x USB 2.0
Playback Features	Yes

Summary

Key Features of Your DVR

Safety Regulations

INTRODUCING YOUR REAL TIME DVR

Controls on the DVR

Overview of the front panel controls and their functions.

INSTALLATION

Checking Installation Environment

Ensuring suitable conditions for optimal DVR performance and longevity.

HDD Addition

Procedures and considerations for installing or upgrading hard disk drives.

HDD Addition Considerations

Setting the Jumper

How to Add Hard Disks

CONNECTING WITH OTHER DEVICES

Connecting Video, Audio, and Monitor

Guidance on connecting cameras, audio devices, and monitors.

Connecting the Network

Steps for establishing network connectivity for remote access.

Connecting to Internet through ADSL

Connecting the USB

Instructions for connecting USB devices like storage or memory.

Connecting the Alarm Input/Output

Connecting the RS-485 Device

LIVE

Operating the System

Steps to power on and initialize the DVR for live operation.

Live Screen Mode

Overview of different display layouts for live video feeds.

Live Screen Modes

Detailed descriptions of various screen split and display configurations.

Selecting Live Screen Mode

How to switch between different live screen display modes.

FREEZING AND ZOOMING

Freeze Function

Zoom Function

EVENT MONITORING

MENU SETUP

Load Factory Default

Instructions for resetting all settings to their original factory values.

System Information and Setup

Displaying and configuring hardware and software information.

CAMERA

Camera Configuration

Detailed settings for each camera, including video, audio, and title.

PTZ Device Settings

Configuration options for PTZ (Pan/Tilt/Zoom) cameras.

MONITORING

Event Monitoring

Configuring how the system reacts and displays during detected events.

Spot Out Channel

Spot Out Event Monitor

RECORD MODE

Record Quality and Auto Deletion

Configuring recording quality levels and automatic data deletion.

Record Rate & Video Size

Setting the image recording speed (IPS) and resolution.

Event Record Duration

Configuring pre-event and post-event recording times for events.

EVENT RECORD MODE

Alarm Detection Setup

Configuring settings for recording triggered by alarm events.

Motion Detection Setup

Configuring settings for recording triggered by motion detection.

Video Loss Detection Setup

Configuring settings for recording triggered by video loss events.

SCHEDULE

Alarm Out Schedule

NETWORK

Network Password

Setting passwords for network access to the DVR.

IP Settings

Configuring network IP addresses, gateway, and DNS.

Transfer Protocol Settings

Port Configuration for Smart Viewer

RECORDING

REC (Normal Recording)

Record Schedule

Setting up scheduled recording intervals and modes.

Event Recording

SEARCH AND PLAY

Calendar Search

Event Search

Performing an Event Search

Date Time Search

Go To First Search

Go To Last Search

Backup Search

Playback

Playback Modes and Controls

Smart Viewer

Main Features

Installation

Steps to install the Smart Viewer software on a PC.

Installation Process

Initial Screen and Setup Mode

Understanding the Smart Viewer interface and accessing setup options.

DVR Setup

Configuring DVR-specific settings remotely via Smart Viewer.

System Settings

Adjusting system-wide configurations for the DVR through Smart Viewer.

Password Settings

Managing passwords for accessing the DVR and Smart Viewer.

Date/Time Setup

Storage Setup

Managing and configuring storage devices connected to the DVR.

Site Setup

DVR List

Site Management

MONITORING MODE

Connection Failures

Login and User Connection

Interface Navigation Buttons

PTZ Camera Controls

Self Menu Setup of PTZ Device

APPENDIX

Factory Default Settings

Troubleshooting (FAQ)

Common problems and their solutions for DVR operation.