Samsung SPD-400 - Editing and Deleting Layouts

setup screen
34_ setup screen
To edit existing layout
1. Click the checkbox to select an added
device.
2. Edit the existing information.

Note that <Protocol> and <Address> fields
are not allowed to edit.
3. Click [Save (
)].
4. To cancel, click the [Cancel (
)]
button.
To delete existing layout
1. Click the checkbox to select an added
device.
2. Click [Delete (
)] button on the top
of the layout list.
3. When a confirmation message appears,
click [OK].
M
 A layout that is used by a <Quad layout> or in the <Sequence setup>, or currently displayed
on the monitoring screen cannot be changed or deleted, and such an attempt will display a
confirmation message.
To set the audio for the added single layout
1. From the list of added single layouts,
set the audio to <ON> or <OFF> to
your preference.
- For a device configured to output
audio, it cannot be switched from
<OFF> to <ON> in quad mode
layout. A confirmation message appears on such an attempt.
- Audio can be selected only when the device’s audio output is set to <ON> in its
single layout configuration.