14_ installation & connection
installation & connection
CONNECTING WITH OTHER DEVICE
Connecting Video Out
Connect a monitor to the preferred video output of the network video decoder.
J
It outputs video through the port according to the setting configured in the Web Viewer’s “Display
Setup > Monitor”. (Page 37)
When in HDMI or VGA output mode, the display may not render properly if configured resolution is
not supported by the monitor.
Press and hold [RESET] button for about 1 second to change the video output mode.
The MONITOR LED changes its color accordingly.
AUDIO OUT
VGA
VIDEO OUT
HDMI
Network
Amp Speaker
Monitor Monitor Monitor
Camera
Microphone
To Next Page
Loading...
