Samsung 450 Series - TV Wall Mounting Safety and Maintenance; Preventing TV from Falling; Product Storage and Maintenance

Securing the TV to the Wall
Caution: Pulling, pushing, or climbing onto the 1V may cause the 1V to fall. In particular, ensure that your children
do not hang over or destabilize the 1V; doing so may cause the 1V to tip over, resulting in serious injuries or death.
Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for
safety purposes, as follows.
To prevent the TV from falling
.
.
.
.
·
·
·
·
·
.
•
.
.
.n
....
........
.
.
..•..•....
.
.
.
~ Since the necessary clamps, screws, and string are not supplied,
please purchase these additionally.
1. Drive the screws into the clamps and firmly fasten them onto the
wall. Make sure the screws are firmly fixed into the wall.
~ Screw Specifications
• For a 17 - 29 Inches LCD 1V: M4
• For a 32 - 40 Inches LCD 1V: M6
2. Remove the screws from the back center of the 1V, put the screws
into the clamps, and then fasten the screws onto the 1V again.
3. Connect the clamps fixed onto the 1V and the clamps fixed onto
the wall with a strong cable and then tie the string tightly.
~ Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have any doubt
about the security of your connections, contact a professional
installer.
~ Install the 1V near to the wall so that it does not fall backwards.
~ It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the 1V.
Untie the string before moving the 1V.
Storage and Maintenance