◀ ▶
English
Issues Solutions and Explanations
RF(Cable/Antenna) Connection
The TV is not receiving
all channels.
●
Make sure the coaxial cable is connected securely.
●
Run Auto Program to add available channels to the
channel list. Go to MENU - Channel - Auto Program
then select Auto and make sure to select the correct
Cable TV signal type. There are 3 options, STD, HRC
and IRC. Most cable systems use STD.
●
Verify the antenna is positioned correctly.
No Caption on digital
channels.
Check the Caption Setup menu. Try changing Caption
Mode Service 1 to CC1.
Some channels may not have caption data.
To Next Page
Loading...
