◀ ▶
English
1. Use the arrow buttons to select a channel, and then press the
T●
Tools button. A
check appears next to the channel.
You can select more than one channel by highlighting each channel with the
cursor, and then pressing ENTER
E
.
2. Press the TOOLS button on your remote control.
3. Select an option, and then press ENTER
E
to activate the option or change its
settings.
Exceptions: Select All. See the end of the Channel Manager section for
information.
Options
●
Watch: Watch the channel you selected. Appears only if you selected a channel
you are not currently watching. To use, select Watch on the Option menu, and
then press ENTER
E
.
To Next Page
Loading...
