Samsung AC***KNZDCH/AA - Page 40

40
Option SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
Explanation PAG E
Use of external
control
Setting the
output of external
control
RESERVED
Buzzer control
RESERVED
Indication
and Details
Indication
Details Indication Details Indication Details Indication Details
2
0 Disuse 0
Thermo
on
0 Use of buzzer
1
ON/OFF
Control
1
Operation
on
1
Non use
of buzzer
2
OFF
Control
3
WINDOW
ON/OFF
Control
Option SEG19 SEG20 SEG21 SEG22 SEG23 -
Explanation PAG E
control of a
remote controller
Heating setting
compensation
RESERVED RESERVED
-
Indication
and Details
Indication
Details Indication Details Indication Details -
3
0 or 1
Indoor
1
0 Disuse
-
2
Indoor
2
1
3.6°F
(2°C)
3
Indoor
3
2
9.0°F
(5°C)
4
Indoor
4
5. Press the button to save and complete the option setting.
6. Press the
button to exit to normal mode.
NOTE
t Press button anytime during setup to exit without setting.
t Option code will not be applied if you don't press
button.
t Setting Installation option code is available only with a master wired remote controller.
t Setting Installation option code is available when there is one on one connection between a wired remote
controller and an indoor unit.
Setting an indoor unit address and installation option
jhjGvktG}Tho|ptuv{jvkllunUGGG[W YWX]TXWTX_GGG㝘㤸GXXaYXaY`