To Next Page
J
Jasmine Miller MDSep 6, 2025
What to do if my Samsung Air Conditioner has H/W DC_Link Over Voltage Error?
- WWesley AdamsSep 6, 2025
If your Samsung Air Conditioner displays a H/W DC_Link Over Voltage Error, contact an Authorized Service Center.
What to do if my Samsung Air Conditioner has H/W DC_Link Over Voltage Error?
If your Samsung Air Conditioner displays a H/W DC_Link Over Voltage Error, contact an Authorized Service Center.
What to do if my Samsung Air Conditioner has a reverse or open phase?
If your Samsung Air Conditioner has a reverse phase or open phase, contact an Authorized Service Center.
What to do if my Samsung AC***MXSCCC shows PFC Overload error?
If your Samsung Air Conditioner shows a PFC Overload (Over current) Error, contact an Authorized Service Center.
What to do if my Samsung AC***MXSCCC displays IPM over heat error on inverter 1?
If your Samsung Air Conditioner displays an IPM over heat error on inverter 1, contact an Authorized Service Center.
Why is my Samsung AC***MXSCCC cooling operation restricted?
If the cooling operation of your Samsung Air Conditioner is restricted at an outdoor temperature below Tcool_low value (default: 0 °C), adjust the outdoor temperature settings.
What to do if my Samsung AC***MXSCCC detects blockage on high pressure pipe?
If your Samsung Air Conditioner detects a blockage on the high-pressure pipe, contact an Authorized Service Center.
What to do if my Samsung Air Conditioner system stops due to OLP temperature control?
If your Samsung Air Conditioner system stops due to OLP temperature control, contact an Authorized Service Center.
What to do if my Samsung AC***MXSCCC is not installed smart?
If Smart Install is not installed, install Smart Install.
What to do if my Samsung AC***MXSCCC shows error due to abnormal rotation of the compressor?
If your Samsung Air Conditioner shows an error due to abnormal rotation or unconnected wire of the compressor, contact an Authorized Service Center.
What to do if my Samsung AC***MXSCCC has a communication error between indoor and outdoor units?
If your Samsung Air Conditioner shows a communication error between the indoor and outdoor units (pre-tracking failure or a mismatch in the number of indoor units), contact an Authorized Service Center.
General| Brand | Samsung |
|---|---|
| Model | AC***MXSCCC |
| Category | Air Conditioner |
| Language | English |
Carefully read the manual, store it safely, and follow warnings for safe installation and operation.
Follow precautions for unit installation, handling, and safe operation, including environmental and electrical safety.
Ensure power supply compliance, proper grounding, and suitably dimensioned cut-off switches.
Provides diagrams and dimensions for required clearances around the outdoor unit for proper airflow and access.
Illustrates methods for installing the outdoor unit, including wall mounting and using racks with vibration dampening.
Provides specifications for power cables, including model, power source, and FLA/MCA/MOP ratings.
Illustrates the wiring diagram for the power cable connection for a single-phase system.
